header
Multi-Verse Models

Providing a diverse selection of kits, from a variety of quality kit makers.

Home Information
navleft
 


 


 


 


Multi-Verse Kits
 

Design Anomaly

Kessel Run Kits

NorthTrek Creations
 

Alternate Paradigms
 

 




bodydesignanomaly


Breen 1/1000 Scale
 
Item #: DA-1007 Model Length: 12.5 in / 31.5 cm

Notes: Another kit from the vault that was commissioned by a former kit maker and not released until now. Lots of details here that you can mask and paint, and the decals are emblems.   The build photos shown here are of an incomplete build that still needs more detail painting.  Kit comes with 18 pressure-cast parts and a display stand with a cradle that allows you to set the model in place without drilling any extra holes. 
 
 


Insectoid 1/1000 Scale
 
Item #: DA-1006 Model Length: 7 in / 18 cm

Notes: Just like the 1/1000 Primate, this Insectoid was commissioned by a former kit maker but never released until now.  Painting is fairly straight-forward, and the decals really make the kit "pop".  Kit comes with 20 pressure-cast parts, decal sheets, and a beautiful acrylic display stand.
 
 


Surak 1/1000 Scale
 
Item #: DA-1005 Model Length: 13.5 in / 35 cm

Notes: It's been years since this kit was available from another kit maker, but it's back now.  The warp ring is solid, but the primary hull of the kit is hollow allowing for lighting.  Kit comes with 13 pressure-cast parts and a display stand. 
 
 


Primate 1/1000 Scale
 
Item #: DA-1004 Model Length: 8 in / 20.5 cm

Notes: Commissioned by a former kit maker but never released until now. Lots of details here that you can mask and paint, and the decals are fairly simple and easy to apply.  Kit comes with 9 pressure-cast parts and a beautiful acrylic display stand. 
 
 


Constellation 1/1400 Scale
 
Item #: DA-1409 Model Length: 8 in / 20.5 cm

Notes: This kit started life as the old NovaHobbies kit, but has been remastered to include lots of more accurate 3D printed details and an extensive decal sheet.  The decal sheet includes names & registries for the Stargazer, Hathaway, and Valkyrie, as well as some optional details.  Kit comes with 13 pressure-cast parts and a display stand. 
 
 


Surak 1/2500 Scale
 
Item #: DA-2518 Model Length: 5.5 in / 14 cm

Notes: Another re-release of a kit not made for many years.  Includes 6 pressure cast parts, decal sheet, and display stand.
 
 


Kumari Cruiser 1/2500 Scale
 
Item #: DA-2517 Model Length: 5.75 in / 14.5 cm

Notes: Originally available from another kit maker many years ago, and now available from Design Anomaly.  Comes with a completely redrawn decal set to more accurately match known details.  Kit includes 16 pressure-cast parts, decal sheets, and display stand.
 
 


Military Transport 1/2500 Scale
 
Item #: DA-2516 Model Length: 4 in / 10 cm

Notes: This kit was originally sold by another kit maker, but now has wing nacelles to make one of the possible versions more accurate.  Also comes with a completely new decal set that will allow you to build one of two possible affiliations, or generic if that's what you prefer.  Kit includes 22 pressure-cast parts, decals, and display stand.  Kit will only build one model - photo of two ships is to illustrate build options.  Decals can be purchased separately on the DECALS page if you already have this kit in your stash.
 
 


Phobos 1/2500 Scale
 
Item #: DA-2515 Model Length: 4.5 in / 11.5 cm

Notes: Scaled down from the 1/1400 scale kit, this version comes with five parts and display stand.   Decal sheet includes the same names and registries as the larger scale kits, (Phobos, Luna, Iotia).  3D mesh by Catalyst Creations.
 
 


Interceptor 1/2500 Scale
 
Item #: DA-2514 Model Length: 4.5 in / 11.5 cm

Notes: One-piece kit comes with decals and display stand.
 
 


Primate 1/2500 Scale
 
Item #: DA-2513 Model Length: 3.25 in / 8 cm

Notes: Originally sold by another kit maker, this kit now comes with a set of decals.   Clear acrylic display stand seen here is available as long as supplies last.
 
 


Interceptor 1/1000 Scale
 
Item #: DA-1003 Model Length: 11.25 in / 29 cm

Notes: Beautiful detail that pops out after being painted, and the hull is hollow so you can light it up.   Now with a corrected set of decals for the wings and the lettering.  Parts are pressure cast and kit includes the display stand seen in the photos.
 
 


Insectoid 1/2500 Scale
 
Item #: DA-2512 Model Length: 3 in / 7.5 cm

Notes: Originally sold by another kit maker, this kit now comes with a set of decals.   Clear acrylic display stand seen here is available as long as supplies last.
 
Discontinued
Not
Available
 


Soyuz Conversion 1/2500 Scale
 
Item #: DA-2511 Model Length: 3.75 in / 9.5 cm

Notes: This is a CONVERSION kit only, and requires the AMT Cadet Series Reliant.  Kit includes 19 pressure-cast parts, styrene strip, and decals with 3 ship names and some optional details.  Pattern by Catalyst Creations.
 
 


Soyuz Conversion 1/1000 Scale
 
Item #: DA-1002 Model Length: 8.25 in / 21 cm

Notes: This is a CONVERSION kit only, and requires Round2/Polar Lights kit.  The rear portion of the hull with the third shuttlebay is HOLLOW, for those who enjoy lighting up their kits.  Kit includes 19 pressure-cast parts, styrene strip, and decals with 3 ship names and some optional details.  3D mesh by Catalyst Creations.
 
 


Soyuz Conversion 1/1400 Scale
 
Item #: DA-1408 Model Length: 6.5 in / 16 cm

Notes: This is a CONVERSION kit only, and requires the Starcraft Miranda kit that must be purchased separately from Federation Models or elsewhere.  Decal sheets include 3 different names & registries, Bozeman, Collins, Soyuz, and the kit comes with 19 pressure-cast parts.  3D mesh by Catalyst Creations.

 
 


Phobos 1/1400 Scale
 
Item #: DA-1407 Model Length: 8.25 in / 21 cm

Notes: Catalyst Creations designed the 3D mesh for this 1/1400 kit, but it's very similar to the 1/1000 scale hand-crafted version.  The decal sheets include 3 different names & registries (Phobos, Luna, Iotia) and wallpaper decals for the top and bottom of the saucer for easy detailing.  Kit comes with 5 pressure-cast parts and a display stand.  3D mesh by Catalyst Creations.
 
 


Surak-Class 1/1400 Scale
 
Item #: DA-1406 Model Length: 9.75 in / 25 cm

Notes: New 3D designed model comes with 11 pressure-cast parts and display stand.  The mesh designed by Gizmotron is the same as used for the Delta Quadrant 1/2500 and 1/1000 scale Surak kits.  If you paint it a golden brown color, you can make the Ni'Var variant.
 
 


Hideki 1/1400 Scale
 
Item #: DA-1405 Model Length: 3 in / 8.5 cm

Notes: Remastered model includes corrected details, and innaccurate scribed lines have been filled.  A decal set replaces the original scribed lines and the colors are closely based on the look of the studio model.  Original pattern by Nova Hobbies.
 
 


Phobos 1/1000 Scale
 
Item #: DA-1001 Model Length: 12 in / 30 cm

Notes: This kit was originally sold through Timeslip Creations.  The decal sheets have been expanded and now include 3 different names & registries (Phobos, Luna, Iotia) and a whole bunch of additional details including windows.  Decals are also available seperately for those who have the old Timeslip kit but want the extras, or for those who just want an extra set for kit bashing.  Pattern by Scott Spicer.
 
 


Antares-class Freighter 1/1400 Scale
 
Item #: DA-1402 Model Length: 3.25 in / 8.5 cm

Notes: Parts allow for assembly of only one (1) model, but can be built with the crew module attached, or as a drone without the module. Comes with 3 choices for names and registries - Antares, Yorkshire, and Woden.
 
 


Antares-class Freighter 1/2500 Scale
 
Item #: DA-2507 Model Length: 1.75 in / 4.5 cm

Notes: Parts allow for assembly of only one (1) model, but can be built with the crew module attached, or as a drone without the module. Comes with 3 choices for names and registries - Antares, Yorkshire, and Woden.  Pattern by Scott Spicer.
 
Discontinued
Not
Available
 


navright
 


Join these forums or groups to show off your skills or ask advice from the experts.

 

Starship Modeler

 

All Scale Trek

 

Resin Illuminati

 

Science Fiction Modellbau Forum

footer

PayPal Acceptance Mark


All Rights Reserved. Multi-Verse Models, LLC Copyright © 2013-2024.