Providing a diverse selection of kits, from a variety of quality kit makers.
	Falcon-class Scout 1/2500 Scale   Item #: MVM-T-25021 Model Length: 3 in / 7.5 cm Notes: The Falcon-class Scout was originally produced by Ravenstar Studios in the early 2000's and was hand-sculpted.  Now the model comes with an extensive decal sheet with two choices for ship names - U.S.S. Peregrine and U.S.S. Lanner, which are two of the more popular falcons to be found in the world.  Kit also includes a display stand.   $25 Temporarily Out of Stock   Khanst'ntin'pl Multi-Scale   Item #: MVM-T-14005 Model Length: 4.5 in / 11.5 cm Notes: The Khanst'ntin'pl is a blast from the past, originally released by Ravenstar Studios in the early 2000's and was hand-sculpted.  This ship could easily fit into almost any scale of fleet.  If your fleet is 1/1400, then it would be almost the size of a D-7 or K'Tinga.  However, at 1/2500 it would be a larger ship, and at 1/1000 it would be a bit smaller.  Kit includes the etched acrylic display stand for the first 12 orders, and a standard resin stand after that.  Decal sheet also included with lots of random choices for the builder to use.   Valiant-class Scout 1/2500 Scale   Item #: MVM-T-25020 Model Length: 2 in / 4 cm Notes: The Valiant-class Scout was originally produced by Ravenstar Studios in the early 2000's and was hand-sculpted.  Now the model comes with an extensive decal sheet with two choices for ship names - U.S.S. Valiant and U.S.S. Gallant.  Kit also includes a display stand.   Fletcher-class Destroyer 1/2500 Scale   Item #: MVM-T-25019 Model Length: 4 in / 10 cm Notes: The Fletcher-class Destroyer comes with the following ship names - U.S.S. Fletcher, U.S.S. Ingerboll, and U.S.S. Johnston.  Kit includes 6 pressure-cast parts, decals, and a display stand.   Emperor-class Heavy Destroyer 1/2500 Scale   Item #: MVM-T-25018 Model Length: 4 in / 10 cm Notes: The Emperor-class Heavy Destroyer comes with the following ship names - U.S.S. Liu Che, U.S.S. Charlemagne, and U.S.S. Augustus.  Kit includes 7 pressure-cast parts, decals, and a display stand.   Stinger-class Scout 1/2500 Scale   Item #: MVM-T-25017 Model Length: 4 in / 10 cm Notes: The Stinger-class Scout comes with the following ship names - U.S.S. Yellow Jacket, U.S.S. Wasp, and U.S.S. Hornet.  Kit includes 5 pressure-cast parts, decals, and a display stand.   Hero-class Heavy Frigate 1/2500 Scale   Item #: MVM-T-25016 Model Length: 3.75 in / 9.5 cm Notes: Based on the the Tribal-class Frigate, this 3-nacelle version comes with the following ship names honoring mythological and historical heroes - U.S.S Osceola, U.S.S. Cu Chulainn, and U.S.S. Herakles.  Kit includes 8 pressure-cast parts, decals, and a display stand.   Tribal-class Frigate 1/2500 Scale   Item #: MVM-T-25015 Model Length: 3.5 in / 9 cm Notes: The Tribal-class Frigate was previously released by another kit maker a few years ago, and is now once again available here as a Multi-Verse Models kit.  Decals are completely revised and improved, and are available separately on the DECALS page for those who want them.  Includes 5 pressure-cast parts, decals, and a display stand.   D-18 1/2500 Scale   Item #: MVM-T-25014 Model Length: 3.25 in / 8 cm Notes: The D-18 was previously released by another kit maker a few years ago, and is now once again available here as a Multi-Verse Models kit.  Two different necks and bridge heads allow you build it the way you like best.  Decals are completely revised and improved, and are available separately on the DECALS page for those who want them.  Includes 5 pressure-cast parts, decals, and a display stand.   Persevere Tender 1/2500 Scale   Item #: MVM-T-25010 Model Length: 3.75 in / 9.5 cm Notes: Comes with remastered nacelles, extensive decal sheet, and display stand.  Can be built as one of three names and registries - names include U.S.S.Persevere, U.S.S. Enduring, and U.S.S. Stalwart.  Decals also available separately on the Decal page for those who already have this kit in their stash.  Pattern by Ravenstar Studios.   Discontinued Not Available   Drago Hawk - TOS 1/2500 Scale   Item #: MVM-T-25009 Model Length: 3.5 in / 8 cm Notes: Four piece kit comes with two color options for wing decals.  Pattern by Matt Alleman   Will be Discontinued in 2022   Drago Hawk 1/2500 Scale   Item #: MVM-T-25008 Model Length: 3.5 in / 8 cm Notes: Four piece kit comes with two color options for wing decals.  Pattern by Matt Alleman.   Ral'Nassa 1/2500 Scale   Item #: MVM-T-25006 Model Length: 4 in / 10 cm Notes: This two-piece kit would be a fun and easy weekend build.  Pattern by Mick Sinnot.   Cyclone Refit 1/2500 Scale   Item #: MVM-T-25004 Model Length: 6 in / 15 cm Notes: Decals include 3 different names & registries (Cyclone, Tempest, Hurricane) and some optional markings to make your ship unique.  If you want to add a third nacelle or sensor pod, a conversion kit is available on the PARTS page.  Pattern by Mick Sinnot.   Cyclone Carrier 1/2500 Scale   Item #: MVM-T-25003 Model Length: 6 in / 15 cm Notes: Decals include 3 different names & registries (Cyclone, Tempest, Hurricane) and whole bunch of optional markings to make your ship very unique to your personal taste.  If you want to add a third nacelle or sensor pod, a conversion kit is available on the PARTS page.  Pattern by Mick Sinnot.   Fon Tu'Dor Refit 1/2500 Scale   Item #: MVM-T-25002 Model Length: 3.75 in / 9.5 cm Notes: Slight modifications to the details and decals make this ship different from the original Fon Tu'Dor.  Choose the one you like best, or both!  Pattern by Mick Sinnot.   Fon Tu'Dor 1/2500 Scale   Item #: MVM-T-25001 Model Length: 3.75 in / 9.5 cm Notes: Originally designed as 1/2500 scale, it could also be used as a 1/1400 scale scout ship.  Pattern by Mick Sinnot.	Join these forums or groups to show off your skills or ask advice from the experts.   Starship Modeler   All Scale Trek   Resin Illuminati   Science Fiction Modellbau Forum
All Rights Reserved. Multi-Verse Models, LLC Copyright © 2013-2024.